Epson EX9240 Projectors: Difference between revisions

From SWKLS WIKI
Jump to navigation Jump to search
Line 30: Line 30:
====Epson iProjection v3.00 for PC (with Moderator)====
====Epson iProjection v3.00 for PC (with Moderator)====
For projection and control on shared LAN for PCs.
For projection and control on shared LAN for PCs.
Guide: https://files.support.epson.com/docid/cpd5/cpd57865.pdf


===Connection Methods===
===Connection Methods===

Revision as of 15:42, 23 August 2021

Epson EX9240 Projectors

  • 3-Chip 3LCD Full HD 1080p
  • Wireless Projector
  • 4,000 Lumens Color Brightnes
  • 4,000 Lumens White Brightness
  • Miracast
  • 2 HDMI Ports
  • 1 VGA Port
  • 1 USB-B Port
  • 1 USB-A Port
  • 1 Composite Video, L-R Audio Ports (Yellow, Red, White)
  • Built-in Speaker
  • 16,000:1 Contrast Ratio

User's Guide: https://files.support.epson.com/docid/cpd5/cpd59120.pdf

Software

https://epson.com/Support/Projectors/EX-Series/Epson-Pro-EX9240/s/SPT_V11H978020

USB Display Installer v1.80

For direct connection via USB-B between PC and projector. Carries both Video and Audio signals.

Epson Projector Management v5.40

For projector management in LAN (single or multiple). Should only be installed on staff computers.

Guide: https://files.support.epson.com/docid/cpd5/cpd56366.pdf

Epson iProjection v3.00 for PC (with Moderator)

For projection and control on shared LAN for PCs.

Guide: https://files.support.epson.com/docid/cpd5/cpd57865.pdf

Connection Methods

USB: Audio & Video

USB-B to USB-A cable required (standard end and square end)

VGA (Blue): Video Only

Note: Can input Audio via 1/8" to RCA cable

HDMI: Audio & Video

Standard HDMI cable between PC and projector

Wireless App: Video Only

Can use iProjection App on Apple, Android. Go to app store and search for 'epson iprojection'.

iProjection: Audio & Video

When on same LAN as projector, PCs can use iProjection software. Requires iProjection v3

https://ftp.epson.com/drivers/iProj_3.00.exe

Standard Settings

Default web login: EPSONWEB / admin

If projector will be used by public / patrons, set wireless to 'Library' SSID.

Network Settings

Network > Network Configuration > Wireless LAN > Connection Mode

  • Advanced (Best): unit will use SSID provided to it. PCs and other devices will need access to this LAN. Devices will have Internet access provided the LAN used has Internet. Suggest using 'Library' network so that patrons can use device if needed.
  • Quick : Projector will broadcast it's own SSID and devices can connect to that signal (passphrase required). No Internet is available to devices connected in this manner!