Epson EX9240 Projectors: Difference between revisions

From SWKLS WIKI
Jump to navigation Jump to search
No edit summary
No edit summary
 
(9 intermediate revisions by the same user not shown)
Line 13: Line 13:
* Built-in Speaker
* Built-in Speaker
* 16,000:1 Contrast Ratio
* 16,000:1 Contrast Ratio
User's Guide: https://files.support.epson.com/docid/cpd5/cpd59120.pdf


===Software===
===Software===
Line 23: Line 27:
====Epson Projector Management v5.40====
====Epson Projector Management v5.40====
For projector management in LAN (single or multiple). Should only be installed on staff computers.
For projector management in LAN (single or multiple). Should only be installed on staff computers.
Guide: https://files.support.epson.com/docid/cpd5/cpd56366.pdf


====Epson iProjection v3.00 for PC (with Moderator)====
====Epson iProjection v3.00 for PC (with Moderator)====
For projection and control on shared LAN for PCs.
For projection and control on shared LAN for PCs.
Guide: https://files.support.epson.com/docid/cpd5/cpd57865.pdf


===Connection Methods===
===Connection Methods===
There are a number of ways to connect to the projector. Each has pros and cons.
==== Miracast Wireless====
Requires no software installation, passes video and audio.
# On Windows 10, open the Action Center (right / bottom corner) and select Project.
# Then select Connect to a wireless display.
# A scan for wireless display devices will start. Select your desired wireless display device.


====USB: Audio & Video====
====USB: Audio & Video (Windows & Mac)====
USB-B to USB-A cable required (standard end and square end)
USB-B to USB-A cable required (standard end and square end). This connection will provide both video and audio, but requires the USB Display software installation: https://ftp.epson.com/drivers/UD_1.80.exe


====VGA (Blue): Video Only====
====VGA (Blue): Video Only====
Note: Can input Audio via 1/8" to RCA cable
This requires the older blue ended VGA cable. No software installation is needed, but audio is not passed to projector. A separate cable is needed for audio: 1/8" to RCA cable.


====HDMI: Audio & Video====
====HDMI: Audio & Video====
Standard HDMI cable between PC and projector
Standard HDMI cable between PC and projector. This passes both video and audio to projector.


====Wireless App: Video Only====
====Wireless App: Video Only (Android, IOS)====
Can use iProjection App on Apple, Android. Go to app store and search for 'epson iprojection'.
Can use iProjection App on Apple, Android. Go to app store and search for 'epson iprojection'. This option does not pass audio.


====iProjection: Audio & Video====
====iProjection: Audio & Video (Windows & Mac)====
When on same LAN as projector, PCs can use iProjection software. Requires iProjection v3
When on same LAN as projector, PCs can use iProjection software. Requires iProjection v3 software installation.
 
'''NOTE: '''ONLY USE FOR LIBRARY OWNED COMPUTERS AS THEY MUST BE ON SECURED NETWORK.


https://ftp.epson.com/drivers/iProj_3.00.exe
https://ftp.epson.com/drivers/iProj_3.00.exe


===Standard Settings===
===Standard Settings===
Line 50: Line 74:
Default web login: EPSONWEB / admin
Default web login: EPSONWEB / admin


If projector will be used by public / patrons, set wireless to 'Library' SSID.


====Network Settings====
====Network Settings====
Network > Network Configuration > Wireless LAN > Connection Mode
Network > Network Configuration > Wireless LAN > Connection Mode
* Advanced (Best): unit will use SSID provided to it. PCs and other devices will need access to this LAN. Devices will have Internet access provided the LAN used has Internet. Suggest using 'Library' network so that patrons can use device if needed.
* Advanced (Best): unit will use SSID provided to it. PCs and other devices will need access to this LAN. Devices will have Internet access provided the LAN used has Internet. ''Suggest using ''''Library'''' network so that patrons can use device if needed.''
* Quick : Projector will broadcast it's own SSID and devices can connect to that signal (passphrase required). '''No Internet is available to devices connected in this manner!'''
* Quick : Projector will broadcast it's own SSID and devices can connect to that signal (passphrase required). '''No Internet is available to devices connected in this manner!'''
===Connection Flowchart===
[[File:Projector Connections.png|frame]]




[[Category:Technology]]
[[Category:Technology]]

Latest revision as of 13:04, 25 August 2021

Epson EX9240 Projectors

  • 3-Chip 3LCD Full HD 1080p
  • Wireless Projector
  • 4,000 Lumens Color Brightnes
  • 4,000 Lumens White Brightness
  • Miracast
  • 2 HDMI Ports
  • 1 VGA Port
  • 1 USB-B Port
  • 1 USB-A Port
  • 1 Composite Video, L-R Audio Ports (Yellow, Red, White)
  • Built-in Speaker
  • 16,000:1 Contrast Ratio

User's Guide: https://files.support.epson.com/docid/cpd5/cpd59120.pdf


Software

https://epson.com/Support/Projectors/EX-Series/Epson-Pro-EX9240/s/SPT_V11H978020

USB Display Installer v1.80

For direct connection via USB-B between PC and projector. Carries both Video and Audio signals.

Epson Projector Management v5.40

For projector management in LAN (single or multiple). Should only be installed on staff computers.

Guide: https://files.support.epson.com/docid/cpd5/cpd56366.pdf

Epson iProjection v3.00 for PC (with Moderator)

For projection and control on shared LAN for PCs.

Guide: https://files.support.epson.com/docid/cpd5/cpd57865.pdf



Connection Methods

There are a number of ways to connect to the projector. Each has pros and cons.

Miracast Wireless

Requires no software installation, passes video and audio.

  1. On Windows 10, open the Action Center (right / bottom corner) and select Project.
  2. Then select Connect to a wireless display.
  3. A scan for wireless display devices will start. Select your desired wireless display device.

USB: Audio & Video (Windows & Mac)

USB-B to USB-A cable required (standard end and square end). This connection will provide both video and audio, but requires the USB Display software installation: https://ftp.epson.com/drivers/UD_1.80.exe

VGA (Blue): Video Only

This requires the older blue ended VGA cable. No software installation is needed, but audio is not passed to projector. A separate cable is needed for audio: 1/8" to RCA cable.

HDMI: Audio & Video

Standard HDMI cable between PC and projector. This passes both video and audio to projector.

Wireless App: Video Only (Android, IOS)

Can use iProjection App on Apple, Android. Go to app store and search for 'epson iprojection'. This option does not pass audio.

iProjection: Audio & Video (Windows & Mac)

When on same LAN as projector, PCs can use iProjection software. Requires iProjection v3 software installation.

NOTE: ONLY USE FOR LIBRARY OWNED COMPUTERS AS THEY MUST BE ON SECURED NETWORK.

https://ftp.epson.com/drivers/iProj_3.00.exe



Standard Settings

Default web login: EPSONWEB / admin


Network Settings

Network > Network Configuration > Wireless LAN > Connection Mode

  • Advanced (Best): unit will use SSID provided to it. PCs and other devices will need access to this LAN. Devices will have Internet access provided the LAN used has Internet. Suggest using 'Library' network so that patrons can use device if needed.
  • Quick : Projector will broadcast it's own SSID and devices can connect to that signal (passphrase required). No Internet is available to devices connected in this manner!


Connection Flowchart

Projector Connections.png