Latest revision as of 17:20, 16 May 2022

SWKLS Mobile Papercut Printer

These are the instructions for configuring the SWKLS mobile printer (Canon G3260 Inkjet) on a member library network and Papercut secondary server

The printer is preconfigured to establish a wireless connection on the secured network SSID

Setup / turn on printer
Ensure that the ink valve lever is set to the correct position !!! (see printed instructions in box)
Verify wireless network connection by looking at router DHCP leases.
Note the IP address that is assigned
Printer can be accessed via web interface if needed, use serial # on back of device as password to log in

Open Print Management (printmanagement.msc)
Add a new printer using the IP address found in the prior steps
The driver should be automatically obtained (Canon Inkjet Type4 Class Driver)
Verify that the printer port is correct (TCP/IP, not WSD)
Verify permission in Security Settings tab under Print Management (may need to allow Users group to manage)
Verify installation by doing a test print (may need to open print queue and resume print job)

@@ Line 18: / Line 18: @@
 # The driver should be automatically obtained (Canon Inkjet Type4 Class Driver)
 # Verify that the printer port is correct (TCP/IP, not WSD)
+# Verify permission in Security Settings tab under Print Management (may need to allow Users group to manage)
 # Verify installation by doing a test print (may need to open print queue and resume print job)